Comica CVM-WM100 Wireless Lavalier Microphone Kit - Transmitter/Receiver/Microphone/Accessories with Softcase

Comica CVM-WM100 Wireless Lavalier Microphone Kit - Transmitter/Receiver/Microphone/Accessories with Softcase

$159.00 Including Sales Tax

The CVM-WM100 is a wireless lavalier microphone kit from Comica. This kit contains one transmitter, one receiver, one lavalier microphone with a 3.5mm connector, a soft case, and accessories like a wind muff, 3.5mm-XLR adapter, and cold shoe mounts for the transmitter and receiver.

Share This Items :

Fast Shipping

To Continental US

easy Financing

With Small Payments

Description

The CVM-WM100 is a wireless lavalier microphone kit from Comica. This kit contains one transmitter, one receiver, one lavalier microphone with a 3.5mm connector, a soft case, and accessories like a wind muff, 3.5mm-XLR adapter, and cold shoe mounts for the transmitter and receiver.

To use this kit, install two AA batteries(not included) in both the transmitter and receiver, then turn them on. Select one of 48 available channels, and monitor for signal interference. If there is a lot of interference on one channel, scan through others until you find a clean, noise-free channel to use. Both the transmitter and receiver can be worn on the belt, mounted to the included cold shoe mounts, or attached to an accessory arm via the 1/4-20 mounting point on each unit.

When a solid signal is established, connect the lavalier mic and, if you desire, a secondary sound input device to the transmitter. Plug the receiver into the camera, recorder, or speaker of your choice (for speakers, make sure they have sufficient amplification to adequately handle the signal). Test the levels by taking test-audio, and get to recording! When recording is finished, the entire kit can be placed into the included soft carrying case for storage and transport.

Features:

  • 100m maximum transmission distance
  • 48 channels to choose from between 520-534.1MHz
  • Less than .5% audio distortion
  • Receiver and transmitter run on 2 AA batteries (not included)
  • 3.5mm input/output ports with 3-pin XLR adapter included
  • Mounts with included belt clips or via 1/4-20 mounting points on TX/RX bodies
  • LCD screen includes signal strength and battery life indicators

Specifications:

  • Transmitter
  • Channels: 48
  • Wireless Frequency: 520.000MHz~534.100MHz
  • Signal / Noise: >65dB
  • Antenna: 1/4 Wavelength Antenna
  • Transmitting Power: 10dBm / 15dBm
  • Stray Radiation: <-60dBc
  • Sound Delay: <20ms
  • Audio Distortion: <0.5%
  • Audio Input Socket: 3.5mm Socket
  • Batteries: AA Batteries x 2pcs (not included)
  • Size: 111.5 x 65 x 25.3mm
  • Operating Temperature: 32°F – 122°F (0°C ~ +50°C)
  • Storage Temperature: -4°F – 140°F (-20°C ~ +60°C)

    Receiver

  • Channels: 48
  • Wireless Frequency: 520.000MHz~534.100MHz
  • Signal / Noise: >65dB
  • Antenna: 1/4 Wavelength Antenna
  • Receiving Sensitivity: 95dBm
  • Sound Delay: <20ms
  • Audio Distortion: <0.5%
  • Frequency Range: 20Hz ~ 18KHz
  • Audio Output: 3.5mm Port
  • Batteries: AA Batteries x 2 pcs(not included)
  • Size: 111.5 x 65 x 25.3mm
  • Operating Temperature: 32°F – 122°F (0°C ~ +50°C)
  • Storage Temperature: -4°F – 140°F (-20°C ~ +60°C)

Item Includes:

  • Transmitter
  • Receiver
  • 3.5mm Audio Mic
  • 3.5mm-3.5mm Audio Output Cable
  • 3.5mm-XLR Audio Output Cable
  • Waist Belt Clip x 2pcs
  • Camera Mount x 2pcs
  • Wind Muff
  • Portable Case
  • User Manual
  • Warranty Card

Additional information

Weight 10 lbs
Dimensions 16 × 12 × 10 in
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Etiam vel risus imperdiet, gravida justo eu.
%d bloggers like this: